Goessling Low Profile Magnetic Slide Conveyors are typically used inside stamping dies, punch presses and machining centers where a minimal amount of space is available. Material transferred by these conveyors are steel parts only, such as small punched or formed steel parts, scrap, pins, chips, etc. A continuous system of permanent magnets attracts the steel parts (or scrap) to the stainless steel slide surface and moves them to the discharge end of the conveyor. The stainless steel slide surface is also available with a textured surface to prevent flat parts from sticking to it or can also be made out of manganese steel for highly abrasive materials. All moving parts of the conveyor are lubricated for life and hermetically sealed within the conveyor frame. By using different size magnets even large strips of metal can be conveyed without problems.